• 422 hp nat. aspirated
• 838 hp supercharged
• Compare: Stock vs Cammer 7000

• Chips & computers
• Mass Air & Injectors
• Throttle Bodies & Filters

838 hp
Cobra
32 valve Engine !

Running in a very limited state of tune, the latest Threshie Motorsports 4.8L 32 valve Cobra engine showcases the very latest developments in Ford modular engine development.  This technology is available to you now through TMS.   Call us to order your new Cobra engine with 4.6 to 5.2L or even 5.4 to 5.7L displacement.

Featuring our new Cammer 7000
Intake Manifold

838 horsepower @ 7200 rpm  Supercharged @ 17.5 psi   631 ft-lbs torque @ 6100 rpm

Engine Specifications:

• 3.622 " bore, 3.543 stroke ; 4.8L/ 292 cid
• Vortech T-Trim supercharger
• 8.5-1 compression Ross pistons, billet rods
• 1 7/8-2-2 1/8" Stepheaders,mufflers
• TMS Level IV stainless big valve heads
• TEC-II EFI ,83 lb-hr fuel injectors
• TMS Level V racing camshaft set
• Cammer 7000 Street/ Racing intake
• Engine blueprinted, studded &
    O-ringed by Threshie Motorsports

We had only begun to tap the power potential of this engine! It was designed to run at 25+ psi of manifold pressure, but we couldn't exceed 17.5 psi without breaking the blower belt. The next test with a 60 mm cog belt & 25 psi should exceed 1000 hp. What does that mean for your street driven Cobra? More power and more torque than you thought possible.

It's the combination! Our new Cammer Flow Paks give your Cobra balanced torque and power. Cammer Flow Paks are available in Street Level I to V and Racing Level I to VI. Choose matching Level components and you will have the power output of your choosing, predictably. Eliminate the mystery of the 4.6.